Packet Tracer CISCO CCNA - Aula 13 - Configurar DHCP no Router - www.pro...

Configurar ROTEADOR e SWITCH:

Router>enable

Router#configure terminal

Router(config)#hostname Capinzal

Router(config)#enable secret ti-redes

Router(config)#banner motd $

Router(config)#interface fastEthernet 0/1

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#interface ethernet 0/0/0

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#no shutdown

Configurando acesso telnet:

Router>enable

Router#configure terminal

Router(config)#line vty 0 15

Router(config-line)#password ti-redes

Router(config-line)#login

Router(config- line)#exit

Router(config)#service password-encryption

Configurando Rota:

Router>enable

Router#configure terminal

Router(config)#ip route 192.168.0.0 255.255.255.0 fastEthernet 0/0

Configurando Rota STUB:

Router>enable

Router#configure terminal

Router(config)#ip route 0.0.0.0 0.0.0.0 fastEthernet 0/0

Configurando Rota RIP:

Router>enable

Router#configure terminal

Router(config)#router rip

Router(config)#version 2

Router(config-router)#network 192.168.1.0

Router(config-router)#network 10.0.0.0

Router(config-router)#passive-interface Ethernet 0/0/0 (Não possui roteadores conectados a ela)

Configurando VLAN:

Switch>enable

Switch# show vlan

Switch# configure terminal

Switch(config)# vlan 10

Switch(config-vlan)# name administrativo

Switch(config-vlan)# exit

Switch(config)#

Switch(config)# interface fastEthernet 0/1

Switch(config-if)# switchport mode access

Switch(config-if)# switchport access vlan 10

Switch(config-if)# exit

Switch# sh vlan

Configurando TRUNK:

Switch> enable

Switch# configure terminal

Switch(config)# interface fastEthernet 0/1

Switch(config-if)# switchport mode trunk

Configurando PORT SECURITY:

Switch>enable

Switch# configure terminal

Switch (config)# interface fastEthernet 0/1

Switch (config-if)# switchport port-security

Switch (config-if)# switchport port-security mac-address sticky

Switch (config-if)# switchport port-security maximum 1

Switch (config-if)# switchport port-security violation shutdown

Switch (config-if)# show port-security

Switch (config-if)# clear port-security sticky

Modos de Configuração
roteador> -  Modo Usuário

roteador# -  Modo Privilegiado
roteador(config)# -  Modo Global